Fire Sprinkler Inspection in Oklahoma City, OK
Fire sprinkler inspection is the scheduled, code-required examination of your commercial fire sprinkler system to confirm it will operate correctly during a fire. Oklahoma City Fire Protection performs NFPA 25 fire sprinkler inspections for commercial and multi-family properties throughout the Oklahoma City metro area. We inspect and test — we do not install or repair sprinkler systems.
Inspection at a glance
- NFPA Code
- NFPA 25
- Frequency
- NFPA 25 requires quarterly inspections of sprinkler control valves, valve tamper switches, and alarm devices, with annual main drain and waterflow alarm tests
- Response
- Within 24 hours
Understanding fire sprinkler inspection
A fire sprinkler inspection is a documented examination of your sprinkler system performed by a licensed technician to verify that all components — control valves, sprinkler heads, piping, alarms, and water supply — are in proper working condition per NFPA 25.
NFPA 25 is the Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems. It defines the required inspection intervals, test methods, and documentation for commercial sprinkler systems.
We are an inspection-only company. We do not install or repair sprinkler systems. If our inspection finds deficiencies, we document them and refer you to a licensed sprinkler contractor for corrections.
Our inspection checklist
- Control valves — position, accessibility, and tamper switches
- Sprinkler heads — clearance, corrosion, damage, and proper orientation
- Wet and dry pipe system main drain tests
- Waterflow alarm tests (electric and water motor gongs)
- Antifreeze system concentration (where applicable)
- Fire department connection (FDC) — caps, gaskets, and accessibility
- Hydraulic design information plate
- Signage and valve identification
Inspection frequency
NFPA 25 requires quarterly inspections of sprinkler control valves, valve tamper switches, and alarm devices, with annual main drain and waterflow alarm tests. A full internal inspection of piping and a 5-year sprinkler head sample are required every five years. Oklahoma enforces these intervals through the State Fire Marshal and local AHJs.
Benefits of staying compliant
Prevent failed fire marshal inspections and insurance non-renewal
Confirm your system will deliver water when a fire occurs
Catch closed valves, corroded heads, and blocked sprinklers early
Document compliance with NFPA 25 for your AHJ and insurance carrier
One consolidated report for single buildings or multi-property portfolios
Our inspection process
1. Schedule
Call or request online. We confirm a time — usually within 24 hours across the OKC metro.
2. Inspect
Our licensed technician inspects all required components per the NFPA 25 inspection checklist and performs waterflow and drain tests.
3. Report
You receive a complete inspection report with test results, deficiency notes, and recommended next steps for your repair contractor.
Oklahoma code requirements
Oklahoma adopts NFPA 25 through the Oklahoma State Fire Marshal's Office and the International Fire Code. Quarterly and annual sprinkler inspections are required for all commercial sprinkler systems, and records must be available for AHJ review.
Who needs this inspection
Fire Sprinkler Inspection FAQs
Schedule your fire protection inspection
Tell us about your property and the services you need. We'll send a same-day quote and get you on the schedule — usually within 24 hours across the Oklahoma City metro.
Ready to schedule your fire protection inspection?
One inspection. One report. Fully compliant. We handle every fire and life safety system for your commercial property — so you stay compliant without juggling multiple vendors.